My Cart: 0 item(s)
Designed to reinforce the JL Roof Rack to support heavier loads (RTT etc.) by tying it into the roll cage/tub. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
- Powdercoated
- Hardware Included
- Made in the USA
- Free shipping!
Looking for answers to common questions about us or our products? See our FAQ here.
15 Questions asked on JL Roof Rack Reinforcement | Jeep Wrangler (2018+) •
Ask us anything
- < Previous
- 1
- 2
- 3
Q Christian • 05/24/2021, 6:24:21 PM Is it possible to still remove the hardtop after using the reinforcement kit and is so, are the braces left on the rollbar or does ot separate there?
A 06/04/2021, 11:31:41 AM You would pull the rack and top as a unit. All the tie-in brackets would stay with the top. Super easy to do.
Q Corey Meyers • 08/04/2021, 1:58:09 PM Hello, I too am curious what the actual numbers are for weight bearing with the added reinforcement. Can we get those numbers? Love the rack and would like to order but can't without seeing what those would be.
Thank you!
A 08/12/2021, 2:32:10 PM We have no official ratings on this, loads are at your discretion.
Q David • 08/11/2021, 12:12:34 PM If installed per your video instructions, do you have safe specific (in pounds) static and dynamic load limits available to use for reference?
A 08/12/2021, 2:32:10 PM We have no official ratings on this, loads are at your discretion.
Q Michael Hatton • 01/31/2022, 7:38:31 PM I will be getting the half roof rack for my 2021 Jeep JL and have a question about the reinforcement kit. When selecting the reinforcement kit it only shows two braces, one for each side. However, when I click on the installation video it shows two braces per side. Does the half rack require just the two or will it require the four as in the video? Thanks for you help.
A 02/01/2022, 12:06:12 PM The reinforcement kit will come with two brackets per side. The large rear MOLLE brackets and two small front brackets.
Q David • 02/05/2024, 4:05:50 PM Are the rain gutter clips still used after installing the reinforcement brackets?
A 02/09/2024, 11:02:57 AM Yes, the rack would still install the same with or without the reinforcement brackets.
1
0
0
0
0
Tim Sonier (Arizona) | November 29th, 2021
I installed the full length rack on my 21 JLUR. It matched the roof lines and makes no wind noise while driving on the highway. I have put a Hi Lift jack, shovel and a 270 awning that weighs 72 lbs. on it with out the interior supports. It handles the loads well and looks great as well. I have ordered the internal support kit to increase the load limit. Once that is installed and tested, I'll add another review. Love this rack and so does everyone that sees it.
