My Cart: 0 item(s)
- CNC cut and formed from .188" steel.
- Built in provisions for cube lights.
- Built-in hidden hitch¹ under flippable license plate mount.²
- Cutout for OEM trailer plug.
- The factory receiver hitch will NOT work with this bumper.
- Built-in provisions for left and right Adventure Carriers (can be added at any time, sold separately; see related products below.)
- Proudly designed and made in the USA.
- Compatible with backup sensors, caps provided for non-equipped Jeeps.
- The factory spare location can support a max 34.5" OD (measured) tire with this bumper installed.
- There is NOT enough room to run a tire on each carrier.
- Adventure carriers and accessories sold separately, see related items below.
When you need maximum protection, recovery options, and a modular swing-out system; our Vanguard rear bumper is the perfect choice. This made in the USA bumper features integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swing-outs that can be added or removed at any time! (Sold separately.) The bumper is coated in a 2 stage satin textured black powdercoat over durable zinc primer finish.
* Backup sensors pulled from factory steel bumpers will need (4) qty Mopar part# 6MH85RXFAB to install sensors into the JCR bumper.
Ships freight only! Rate calculated at checkout. Call with any questions, 269-353-1184.
¹ Concessions have been made for extra ground clearance and a sleek appearance and you will need to adjust your equipment accordingly. Depending on your setup this may mean longer drop hitches, wiring extensions, etc...
² Designed to support the loads of the factory tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. We cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.
Looking for answers to common questions about us or our products? See our FAQ here.
33 Questions asked on JT Rear Bumper | Vanguard | Jeep Gladiator (2020+) •
Ask us anything
Q David Figueira • 07/15/2020, 8:55:49 PM Are the wings and mounts sturdy enough to avoid shoving the wings into the bed when sliding over rocks?
A 07/21/2020, 3:41:07 PM The wings are braced to the frame. Plenty strong.
Q Chris • 08/15/2020, 2:07:54 PM Any chance you you'd consider doing this duel arm settup for the jl? I find myself really interested
A 08/18/2020, 11:02:06 AM It's on the list.
Q Shane • 08/17/2020, 1:21:05 PM On the side pieces are those foot steps? And can the tire carrier be locked in the halfway position?
A 08/18/2020, 11:02:06 AM Yes they are footsteps. They can't be locked halfway in stock form, but a hole could be drilled in the track wherever you like.
Q Gary Rees • 08/18/2020, 10:04:57 PM I really want to keep my "factory" license plate lights, is it possible to have the ports cut into this bumper by JCR or would I have to outsource it?
A 08/20/2020, 1:03:29 PM Our bumper will not accommodate the factory license plate lights without modification by the end user. Even then we haven't tested clearances with the factory lights.
Q Heath Pitts • 08/21/2020, 11:55:26 PM Understand that the factory hitch isn’t supported by this bumper, but is the receiver portion included with the bumper or do I have to purchase that separately?
A 09/09/2020, 2:07:14 PM The hidden receiver comes standard with the bumper.
There are no reviews for this item yet.
