3x3 LED Cube Lights - Set of 2
The 3x3 Cube Lights will fit in all of our bumpers except for JK front bumpers. You can also use them as standalone lighting or on our lower windshield mounts.
- Includes (2) lights
- Includes complete wire harness
- 3 Watt LED (12w total)
- Lexan Lens
- IP68/IP69K waterproof
- Flood beam pattern (slightly more throw than a driving pattern)
Looking for answers to common questions about us or our products? See our FAQ here.
3 Questions asked on LED Driving Lights | 3x3 Cube Lights | Pair •
Ask us anything
Q Charles Goss • 04/16/2020, 11:12:48 PM Where are these lights made?
A 04/17/2020, 7:59:06 PM They are imported from China from a supplier that we trust to make high quality LED lights. If you would like an American made light may we suggest Baja Designs or Rigid Industries. They both make very high quality lights.
Q James Phillips • 04/26/2020, 7:50:00 PM Is the wiring harness in this kit long enough to reach from the rear bumper to the engine compartment on a 2014 four door Jeep jk?
A 04/27/2020, 3:56:52 PM No, it will need to be extended.
Q Charles Goss • 05/18/2020, 8:50:16 PM I'm trying to determine which cube light pattern, flood or spot works better with this bumper. I have the front Crusader on my XJ and wondering if the cube lights you sell are spot or flood pattern, and if flood, will any of the opening in the bumper where they mount block any of the light? Do you know how close forward to the square opening in the bumper do the lights sit once installed?
A 05/19/2020, 2:18:41 PM They a driving pattern, which is between flood and spot. No the cutouts do not block a noticeable potion of the beam.
Currently Viewing Reviews with a rating of 3. Click here to reset.
4.33/5 Stars out of 6 Reviews
Write a Product Review: LED Driving Lights | 3x3 Cube Lights | Pair
Anonymous | March 30th, 2015
Requires 4 washers to shim up to fit the hole on the JCR mid width bumper. Pretty disappointed about that since I bought the JCR lights thinking it would be a great fit.
Anonymous | August 18th, 2018
I installed these lights on a new bumper and installed the harness. The harness is about 6 feet too short for a 4 door unlimited. The control relay had to be mounted near the transfer case underneath the jeep. Control switch had to be mounted on passenger side or under the hood. Can not access the fuse holder it's down on the firewall between engine and frame. This kit must have been for a 2 wheel jeep. sdv8760