My Cart: 0 item(s)
Wrangler Rear Bumper - JK dagger
JcrOffroad's Dagger Rear bumper gives the markets best rear departure angle, but still offers protection for the back of the body on the Jeep Wrangler JK.
- CNC cut and formed from 3/16" Steel.
- Requires Frame cutting and drilling.
- Includes (2) 3/4" thick shackle tabs.
- Built-in 2" receiver and safety chain cutouts.¹ ²
- Accepts aftermarket 3x3 LED Cube Lights.
- Includes mounting hardware.
- Includes JcrOffroad Sticker.
- Hand built in the USA!
¹ Concessions have been made for extra ground clearance and a sleek appearance and you will need to adjust your equipment accordingly. Depending on your setup this may mean longer drop hitches, wiring extensions, etc...
² Designed to support the loads of the factory tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. We cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.
Looking for answers to common questions about us or our products? See our FAQ here.
11 Questions asked on JK Rear Bumper | Dagger Stubby | Jeep Wrangler (07-18) •
Ask us anything
- < Previous
- 1
- 2
- 3
Q Jonathan Rowan • 07/01/2021, 4:19:06 PM Will this bumper work with a door mounted tire carrier?
A 07/08/2021, 2:19:03 PM As long as the back of the tire stuck off the gate far enough to clear the bumper face, yes.
3
2
0
0
0
Deborah G (Rhode Island) | May 3rd, 2021
I ordered the bumper for my grandson for Christmas, because that is what he wanted me to buy him,because he loves his jeep. He is well satisfied good product. We will definitely order sgain. Thank you.
Anonymous | December 15th, 2016
This is an awesome looking, low profile bumper. Requires a little bit of cutting but is pretty straight forward. If you are contemplating cutting your frame, quit and just do it! the bumper mounted up nicely.
Anonymous | December 26th, 2017
This was the first thing I ever bought from JCR and it was perfect. The strength and optional textured powder coat is amazing and I bought this bumper for its high clearance low profile mounting and because I wasn't planning on running a spare tire on the back of the Jeep. It took a while to come in, but it the wait was well worth it for the product. I have since purchased much more from JCR because of their amazing customer service and well made products.
Blake North (Utah) | August 13th, 2020
I’d prefer to see bends where they had two cut pieces welded together then ground down. I understand not all the angles can be bent but at least try. Also I’d like to see an option for no pods and no trailer attachment. The 4” cut off was pointless unless you can truly pull this thing right to the body. A good 1.5” is just empty space behind the bumper because the trailer hitch is too close to the rear storage on my jk. If i want a crawler type bumper then I want every inch I can get.
Welds look strong but nothing amazing. I’m sure it’ll hold up and do everything I want hence the 4 stars but I would’ve preferred a higher clearance bumper if I’m going to bother cutting 4” off my frame.
Anonymous | December 31st, 2016
Excellent quality workmanship and welds. This bumper requires a little work to get it mounted but is well worth it if your looking for a minimalist rear bumper. Had some fitment issues with the provided brackets. Called JCR up, sent some pics, new brackets were shipped out quickly. Ended up making the original brackets work since the new ones were even worse. That's the only negative I have the reason for the 4 instead of 5. Customer service is a good solid 5 as the issue was resolved regardless. I get questions regarding this bumper constantly. The only 2 issues I have now that I have ran this bumper for a while now is: 1 needs a bracket inside to mount the trailer plug for trailer lights. Mine is just tied up underneath to hold it out of sight when not in use. 2 I would like the shackle tabs to be the width of the actual shackles so they don't get bound up at an angle if pulling off-center.
