Looking for answers to common questions about us or our products? See our FAQ here.
6 Questions asked on Bed Rack Traction Board Mount •
Ask us anything
Q Steve Cheng • 11/23/2020, 1:59:11 PM Will these fit the Yeeoy traction boards?
A 11/25/2020, 2:53:47 PM We haven't tested with those, but our mounts are designed to be pretty universal.
Q Anthony Parete • 01/31/2021, 2:24:02 PM Can brackets be mounted directly to truck bed behind truck cab 2020 Gladiator? Are locks included?
A 02/02/2021, 5:12:14 PM They were not designed specifically for that purpose, but they are pretty universal mounts. Locks are not included.
Q Aaron • 05/15/2021, 10:34:56 PM How many ARB Tred Pro boards can be mounted to each bracket?
A 05/21/2021, 11:22:51 AM Two boards per side is what they were designed for. You may be able to fit more, but we haven't tested.
Q Amelia • 06/10/2021, 11:33:19 AM Can these be mounted on the inside of the rail on a full height rack?
A 06/11/2021, 3:33:39 PM In theory yes, but we haven't checked to see if there is enough clearance for the traction boards in that config.
Q Martin • 02/20/2022, 11:26:42 PM what is the center to center spacing on the bracket mounting bolts to the bed rack as well as the same for the traction board holes so I know if it will work with my Thorax bed rack as well as ActionTrax boards.
A 03/04/2022, 1:55:10 PM The traction board mounting hole center to center is roughly 10.60". You can mount the brackets in various places on our rack to space them apart, but they are setup for 35.00" hole spacing as shown in the photos.
Q Pieter de Smidt • 03/16/2022, 9:56:57 AM What is spacing between the 2 mounting holes
A 04/06/2022, 12:43:58 PM Roughly 10.6" for the traction board mounting holes.
5.00/5 Stars out of 1 Review
Write a Product Review: Bed Rack Traction Board Mount
Shawn (IN) | August 12th, 2020
This product is not a universal fit for all traction boards. If it only fits one specific brand, then that should be stated. I wasted $100 on two brackets that had to have extra holes drilled into the bedrack just to mount them. The overall length of the mounting holes for my traction boards was 40" and there was no way to mount these as such. And even the width was way off. I used 5" carriage bolts to mount the boards and even the width of these brackets was way off. So it needs to specify that these are absolutely NOT universal fit for "traction boards" as stated in the product description