Q Gregory Walker • 04/17/2020, 7:38:29 PM Your installation link is broken, I can't find the directions for each bolt
A 04/17/2020, 7:59:06 PM We tested the link, and it's working fine for us. If you still can't see it, please contact us using the form on our site, and we can e-mail it to you directly.
Q steve • 05/04/2020, 12:14:08 PM does the xj unibody tie in kit with steering spacer work with a stock bumper?
A 05/05/2020, 2:30:03 PM Yes, you may need to tweak your stock bumper mounts slightly, but it will work.
Q John Hollingshead • 08/02/2020, 7:15:35 PM I already have the steering spacer, can i get the kit without at adjusted price?
A 08/05/2020, 12:41:14 PM We cannot separate the kit at this time.
Q Tyler • 11/12/2020, 11:26:16 AM Do you guys just sell the hardware kit?
A 11/12/2020, 5:54:27 PM Call the shop and talk to customer service for this please, 269-353-1184 or email at email@example.com
Q Keon Ruhi • 03/11/2021, 7:25:25 AM will this kit work on a 1995 jeep cherokee thats right hand drive?
A 03/16/2021, 3:15:09 PM it will not.
Q Milton Reyes • 03/19/2021, 7:46:42 PM What is the difference from XJ Steering Box Brace | Steel Spacer | Jeep Cherokee XJ (84-01) and XJ Unibody Tie-in Kit w/Steering Spacer | Jeep Cherokee (84-01)?
A 03/22/2021, 6:12:20 PM The steering box brace is JUST the inner spacer that goes between the box and frame rails. The UNF kit includes that spacer as well as outer plates to stiffen the whole uni-frame and steering.
Q JD. Katsudas • 06/17/2021, 10:40:21 AM Good Morning , greetings frm Panama
I already have an aftermarket bumper frm Goliath offroad (sorry just found you ahah) that bolts frm the outside of the rail
does this kit goes frm the inside?,, is not compatible w/ that bumper? or do i need to do something special?
A 06/25/2021, 11:08:27 AM Sorry we haven't tested this kit with that bumper. Our brackets are designed to go between the bumper mounts and the uniframe on the outside.
Q Christian Rutherford • 06/18/2021, 11:43:01 AM If installing with an aftermarket bumper, do you install the bumper over the tie-ins or install the bumper then the tie-ins over top and tighten down?
A 06/25/2021, 11:08:27 AM Bumper mounts over a tie-in.
Q Tracy stewart • 08/08/2021, 3:58:40 PM When ordering this kit will my existing nuts and bolts set work or will I have to order a new set due to the added thickness of the brackets etc. If so do you guys sell the set of nuts and bolts needed?
A 08/12/2021, 2:32:10 PM This kit comes with all the hardware you need to install.
Q Vic Chen • 08/31/2021, 9:35:30 AM • Includes steering spacer.
Is it 2 pic for both side or 1 pic for single side?
A 09/02/2021, 10:07:16 AM The kit includes two outside plates, two front tie-ins, one steering box spacer, and hardware.
Q Kris • 10/12/2021, 2:18:15 PM I recently bought a used ARB 3450010 off a wrecked XJ. Will this tie-in kit work? I need something to reinforce for winch use. Thanks
A 10/28/2021, 11:13:00 AM There would need to be enough room between the mounts and the Jeep's uniframe to add these, if there is not, there is a chance you could hammer your bumpers mounts outward for more clearance, but we have not dealt with the ARB specifically.
Q Jay Salow • 12/01/2021, 11:02:24 PM Will your tie in brackets work with a rough country bumper?
A 12/07/2021, 3:11:38 PM The RC bumper should have tie-ins. Ours could work if there is enough room between the bumper mounts and the frame, you may need to bend the bumper mounts out slightly.
Q Rob • 02/14/2022, 9:44:52 AM Does this kit come with the steering box bolts?
A 02/14/2022, 3:53:54 PM Yes, it does.
Q Garrett McNabb • 04/16/2022, 7:56:21 PM Will this kit work with your frame stiffener kit?
A 04/26/2022, 5:45:47 PM Yes
Q Gage • 11/05/2022, 0:47:12 AM Dose it come with all the hardware?
A 11/14/2022, 1:26:56 PM Yes it does.
Q Kyle • 02/01/2023, 10:13:32 AM So my issue I'm having is my steering gear box rusted out of the uni body will this part fix the mounting issue for the gear box
A 02/03/2023, 1:42:58 PM We haven't tested this on a rusty frame, so we can't be sure it will be strong enough for that.
Q Justin • 10/05/2023, 7:47:36 PM Is this kit required when switching to your front bumper?
A 11/29/2023, 4:56:19 PM It is included with all of our winch bumpers to provide additional strength for recoveries situations.