Designed to maximize the storage space by utilizing the front of the bed. Offers customizable mounting for tools and gear. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
Looking for answers to common questions about us or our products? See our FAQ here.
20 Questions asked on JT Bed Front MOLLE Storage Panel | Jeep Gladiator JT (2020+) •
Ask us anything
Q Andrew • 04/20/2020, 10:59:03 PM Does this come with the Hi Lift jack mounts, or is that an add on?
A 04/21/2020, 12:43:17 PM It includes the bolts and spacers for a jack.
Q Blake Anderson • 06/11/2020, 9:54:18 PM I have a bed mounted spare tire and I’d like to use this panel to mount a hi lift jack. How far does a hi lift sit from the front of the bed?
A 06/16/2020, 9:57:53 AM About 3" from the side of the panel and 4" total from the side of the bed. (Side of the flat portion, just above the wheel well.)
Q Mike • 06/30/2020, 5:11:31 PM Will Rotopax mount directly with their supplied mounting hardware or is further modification needed? Thanks!
A 07/07/2020, 2:23:55 PM You would just need rotopax mounts.
Q Mike Rohr • 07/27/2020, 11:26:13 PM Will this work with a soft tonneau cover?
A 08/05/2020, 1:07:37 PM Yes.
Q Mike Rohr • 07/31/2020, 1:09:00 AM Will this Molle Panel work with a Soft Tonneau cover
A 08/05/2020, 12:41:14 PM Yes.
Q Brian Pressman • 08/22/2020, 6:04:00 PM What size rotopax containers could be mounted? Could I fit 2 1.5 gallons or just 2 1 gallon jugs?
A 09/09/2020, 2:07:14 PM These are 2 gallon containers in the photos. Smaller will work as well.
Q Michael • 09/08/2020, 10:22:21 PM Can you mount a hi-lift jack and 2 Rotopax 2 gallon storage packs if you mount the packs horizontal instead of verticle?
A 09/09/2020, 1:19:05 PM There is not really enough room for that.
Q Ken • 09/11/2020, 2:29:21 PM I have the bed rail system. Any chance you have a mounting option for this product?
A 09/14/2020, 3:14:11 PM Yes, our mounting bracket bolt behind the bed rails. We do this so you have full access to the bed rails for other accessories.
Q Sam • 09/26/2020, 5:05:13 PM What size Rotopax containers fit on the forward panel?
A 10/01/2020, 2:06:03 PM 1, 2, or 3 gallons.
Q Rob Muller • 11/08/2020, 4:55:01 PM Do you have a veteran discount? I am a 100% disabled veteran and I can provide proof. Thanks.
A 11/10/2020, 5:08:21 PM Yes, please see this link: https://www.jcroffroad.com/MILITARY.html Thanks for your service.
Q Ehhhhh • 11/16/2020, 10:54:10 AM Will these work with Gator hard tonneau covers?
A 11/23/2020, 10:29:08 AM Yes, should be fine.
Q Lachlan • 11/19/2020, 3:12:32 PM I see your response that 1,2 and 3 gallon Rotopax will fit. How about the larger 4 gallon? If so, will their mounting holes line up with the predrilled holes on the rack?
A 11/23/2020, 10:29:08 AM The mounting hole spacing is not setup for 4 gallon cans.
Q Harpreet • 01/02/2021, 3:00:32 PM Can I mount my recovery track to it, while keeping my soft bed cover. Length is 42” of the traction tracks. If yes, do I have to buy special mounts or are they provided?
A 01/07/2021, 1:01:36 PM You can mount your 42" tracks there yes, we do not provide mounts for them however.
Q Hunter • 01/23/2021, 9:26:28 PM Will this work with a factory Jeep plastic bedliner?
A 01/25/2021, 10:53:52 AM It will probably work with some modifications to your bed liner, but we haven't tried this install at the shop yet.
Q NVarnell • 02/03/2021, 9:45:43 PM Will this work with the DiamondBack tonneau cover? I am looking for front side and rear panels for a 2021 Gladiator.
A 02/08/2021, 10:28:40 AM We haven't tested this specifically with the DiamondBack, but these panels mount behind the factory bed rails, so in theory they should work. You may need to adjust the brackets for the cover.
Q Josh Little • 02/07/2021, 9:19:07 AM Does it block the drain holes? I have a hard tonneau cover that pipes run off through those.
A 02/08/2021, 10:28:40 AM You can probably sneak your hoses through the MOLLE holes into the drain holes.
Q Jd • 06/13/2021, 9:05:37 AM Does the smittybuilt or wavaian 5 gallon Jerry can holders mount with out and modifications?
A 06/25/2021, 11:08:27 AM We haven't tested these specifically. We would assume you would need to drill some holes for mounting.
Q BJ • 11/12/2021, 4:20:57 PM On the photo of the JT Bed Front MOLLE Storage Panel | Jeep Gladiator JT there are two RotoPax. What size are the rotapax containers?
A 12/07/2021, 5:39:48 PM Those are 2 gallon containers.
Q BJ • 11/12/2021, 4:23:36 PM Can the RotoPax mounts bolt directly to the MOLLE Storage Panel or does there need to be an adapter?
A 12/07/2021, 5:37:50 PM Yes, the RotoPax mounts will bolt directly to the panel.
Q Josh • 06/09/2022, 11:46:55 PM How much weight is the MOLLE panel rated to sustain?
A 06/22/2022, 2:23:14 PM We've had about 35 lbs on ours without issue, we don't really have an official weight capacity, however.
Currently Viewing Reviews with a rating of 4. Click here to reset.
4.92/5 Stars out of 12 Reviews
Write a Product Review: JT Bed Front MOLLE Storage Panel | Jeep Gladiator JT (2020+)
Philip Good (Colorado) | January 2nd, 2021
The product gets 5 stars but JCR gets 2 stars for their customer service as the board came without any brackets for installation and it took almost 6 weeks to get the parts so I could install it. Luckily I planned to install over the holiday break and the parts came just in time but I would have been pretty miffed if this were the middle of the summer and I was intending to use right away,. Installation was pretty easy although getting the bolts tightened down behind the board is a bit tricky. I had to re-thread my mounting holes due to the spray in bed liner partially covering them. Did this with a 6mm tap and my power drill on low speed, not much room there to use the standard tap tools. Put two 3 gallon cans in there which will definitely provide some peace of mind given the poor mileage of the Gladiator, especially when towing.