Designed to securely mount a bike to the side of the full-size and mid-size bed racks, in an easy access location. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
Looking for answers to common questions about us or our products? See our FAQ here.
16 Questions asked on Bed Rack Bike Mount •
Ask us anything
Q Paul • 04/20/2020, 2:59:19 PM Wondering how wide these mounts are? I would like to bolt a 1UP bike mount on the supports rather than using the setup on your site. do you think it would handle the 14 lb plus 30 lb bike weight OK?
A 04/20/2020, 3:26:33 PM They are right around 6" wide. Yes, they will handle that weight no problem.
Q Jason walker • 06/26/2020, 2:56:09 PM I ordered two of the bike racks for the bed rack. I am wondering which quick release works with your mount for the front tire? Do you have one that works beast?
A 07/07/2020, 2:27:46 PM We like the Rocky Mounts Driveshaft HM.
Q MP • 08/12/2020, 2:09:25 AM What kind of lock-in system is being used for the front of the bike rack where the tire is removed? Is there any way of ordering one bike rack system and adding an extra front flat rail to avoid taking off the front tire? Thanks.
A 08/12/2020, 3:39:22 PM It's a Rocky Mounts Driveshaft HM mount. We haven't tried a wheel on mount, but the front of the tire would be pretty close to the rear door.
Q Todd Chumley • 09/10/2020, 11:00:28 AM Will this bike mount work with any rack that has the Mille style panels??
A 09/14/2020, 3:14:11 PM No, they are only designed for the bed racks.
Q Ronny Kwon • 11/19/2020, 3:02:36 PM I have a Fishbone off-road tackle bed rack, the half size 12.5" one. Will this fit on my rack?
A 11/23/2020, 10:29:08 AM We have not tested on that rack. I would depend on the angle of your rack uprights.
Q Philip Poytress • 01/07/2021, 10:02:51 AM Will these bike racks work with the CBI CBI Overland rack for a 2nd gen Tacoma? It doesn't look like there is enough room.
A 01/07/2021, 1:01:36 PM We have not tested with that rack, sorry. Our sister company Victory 4x4 does make a compatible rack however: https://www.victory4x4.com/product/VMSBR.html
Q Colin Laberge • 02/05/2021, 8:57:09 PM Will this work with the Wilco off-road low profile bed racks system ?
A 02/08/2021, 10:28:40 AM We have not tested that.
Q Julius Crump • 03/13/2021, 5:35:01 PM will this mount work on your larger gladiator bed rack?
A 03/16/2021, 3:15:09 PM yes
Q Brody Sanzone • 04/01/2021, 5:31:06 PM I cannot find the front tire mount in stock anywhere, is there another option I can use?
A 04/02/2021, 5:30:54 PM Most fork mounts should work. Check out the Kuat Dirtbag. You may have to drill some mounting holes for it however.
Q Steve Cheng • 04/26/2021, 8:06:41 AM Will these work on both sides (left and right) of the bed rack or only the left side as shown in your pictures?
A 04/28/2021, 4:41:20 PM They work on both sides.
Q Daniel • 07/01/2021, 8:31:12 PM Is the rear tire plate wide enough to support 4” fat tires? I have a 65 lb fat tire eBike and am hoping to use your bed rack and bike mounts to transport my bike.
A 07/08/2021, 2:33:54 PM The rear trays fit 4" tires fine. 65 lb of bike is quite a lot for the mounts however, we would be worried about fatigue on the mounts and hardware.
Q Noe B • 07/30/2021, 2:45:17 PM What is the angle on the mount my rack is angled at 35 degrees will this work and keep my bike upright
A 08/12/2021, 2:32:10 PM Roughly 15 degrees
Q LUCAS RIGBY • 12/17/2021, 2:04:32 PM I AM LOOKING TO SEE IF A 20" BMX BIKE AND A 24" CRUISER BMX BIKE WILL FIT? DO YOU RECOMMEND A MOUNT THAT DOESN'T REQUIRE TAKING OFF FRONT WHEEL. MY CARBON FRONT FORKS REQUIRE THE AXLE TO GO THROUGH INSTEAD OF SLIDING OVER A QUICK RELEASE.
A 12/20/2021, 10:44:59 AM It's adjustable to fit most bikes. We use through-axle mounts all the time. A wheel mount will not work, because the front tire would be in the way of the rear doors.
Q Tyson kingsbury • 01/03/2022, 11:01:57 PM I have a Hooke off-road bed rack for a second generation Tacoma. I want to get these bed rack bike mounts but want to make sure they fit mine. I have numerous different holes on the bed racks.
A 01/04/2022, 5:58:27 PM The angles of the sides of that rack are so different than ours that they probably won't work without angling the bikes inward when mounted.
Q Dave • 01/15/2022, 8:31:02 PM I've got the JT Overland rack with the flip up doors from you guys. Will these brackets mount up correctly to this rack? I feel like they will mount but it looks like the angle of the overland is different than your mid and full height racks which could throw off how these brackets mount.
A 02/09/2022, 11:13:03 AM They will not, we are currently working on a specific solution for the Overland Rack.
Q Jeff King • 09/29/2022, 4:26:21 PM What's the maximum bike tire width that it can support? I have a Bakcou Mule w/ the thick maxxis tires.
A 10/11/2022, 4:57:12 PM The tray is 3" at the top, 2" at the base. We've had 4.7's in them without issue, they just kind of rest on top with the strap securing them.
There are no reviews for this item yet.