SKU:

Not a great fit, had to bend 2 of the legs just to get them to line up with the mounting holes.It was pretty far off from a perfect fit. The whole thing sits at an angle, and pulls the rear heat duct out of the front heat outlet. No, it doesn't WOBBLE, but it definitely isn't worth $50 for this poor of a fit.

I regret buying this part. I found one on Amazon for half the price and wouldn’t have had to wait as long as I did for the shipping. The part came and was not in good enough condition to just bolt on. Had to paint it to hide the machining marks left behind. So shipping was very slow for something so small and wasn’t finished enough to bolt on.

This was part of an larger order, front, rear, skid plate and tire carrier. There is no doubt that the craftsmen that physically built this bumper have pride in ownership. Welds are clean as they come, with a nice balance of non-perfection that hand welding provides. Finish was good, but not as durable as one sees in other manufactured baked finishes. For as nice as this was built, it was one of the worse engineered products I have seen in a while. The mechanics are the pits. Simple doesn't make good sense. The metal shield bolted directly on a painted surface is sickling, especially for a new car. Then to remove the water shields to allow water to come into the rear door amazes me that JCR would allow this out of their Q&A department. It simply does not make sense. I spent days re-engineering proper water management for the shield, and then better wiring for the apex of the swing of the carrier. Finally a detachable pin that allows me to open the tire carrier separate from the door so I can actually get the door fully open. Lastly, I needed to put the license plate in a better spot not to cover my expensive rims (my choice, not a flaw of the product). Lastly to move my lug-nuts from metric to SAE is a JOKE. Why in the world would I want to have different lug nuts on my spare tire than that of the vehicle??? Not to mention a different locking lug? I spent another $100 to get around that issue as well. All in all, this was a disappointment, and I really should have made a different choice for tire carrier. Mechanically it's a nightmare, engineering wise not thought out at all. All in all, checks the 'quality' box as an A+. Well thought out box a 'F'. Finish a 'B+', packaging a 'A'.

Seems heavy duty although it mounts between your rear tail light housing and body where those mount. It causes a significant gap at the top of the housing allowing water and debris into the tail light. It also is so thick when I shut my tail gate it began chaffing and slightly cracking the edging of the tailgate above the tail light. Removed before even installing my antenna into it.

This is a so so product when it comes to fitting properly . I purchased one and found that the bracket is between 1/2" to 3/4" to far to the rear of the vehicle to work as purchased. The duct tube that mounts in the console is held to far back to properly hook up with the dash connection, after about an hour of rebending the passenger side rear leg and having to add a spacer under it to screw it in , then bending the passenger side of the tab that the inside of the console bolts to it can be made to work . In my opinion this part is overpriced for the amount of work that needs to be done to make everything fit correctly .

Be warned, the rear fender deletes do no sit flush. I ended up going with a different company due to this.