Q Jeremy • 11/21/2020, 1:25:13 AM Does your free shipping gir the XJ winch bumper kit include British Columbia Canada?
A 11/23/2020, 10:29:08 AM It does not. Please contact us for shipping to Canada: email@example.com
Q Mikey • 11/30/2020, 11:11:28 AM Will this fit with 3/16" frame stiffeners installed, or will brackets need to be modified before welding?
A 11/30/2020, 4:18:13 PM The kit comes with stiffeners, so if you already have them installed, you would just skip that part of the install.
Q Matt • 12/28/2020, 11:16:09 PM Does it come with mounting hardware
A 12/30/2020, 4:42:59 PM It does not, you would need to source your own, or order the full UNF kit with the steering box spacer (https://www.jcroffroad.com/product/XJUNF-PC.html)
Q Warren, S • 02/17/2021, 9:36:03 PM Does this DIY front bumper come 1/4” thick?
A 03/01/2021, 2:33:46 PM It is 3/16
Q Pat McBride • 03/15/2021, 5:57:26 PM I would like to use the DYI front bumper on a 1991 Comanche. Does this fit without any cutting on the fenders?
A 03/16/2021, 3:15:09 PM You will have to cut the fenders.
Q Rowan CP • 03/17/2021, 5:32:39 PM I have frame stiffers on my xj so the mounts need go be about half an inch out from stock on each side, is there something yall will do to adapt to that or do I just weld the brackets where I need them? Thanks in advance!
A 03/22/2021, 6:12:20 PM Our mounts are designed for fit over .188" thick UNF brackets. That is likely the same as your stiffeners. We'd tack weld the mounts per the instructions and test fit it on your Jeep. The mounts can be moved out if needed.
Q Matt Hackmann • 04/06/2021, 6:51:35 PM I have a Warn VR EVO 8-S Winch
And it doesn't fit between the inside the front of the bumper and the back plate that is 90°. The only way it is going to fit is if I cut the back plate off. What is the purpose of the back plate is it structural or is it just there the looks?
A 04/12/2021, 2:38:55 PM The back plate strengthens the winch plate, you may be able to bend it down instead of up for more room.
Q Austin • 04/11/2021, 8:22:21 PM What are the dimensions of the winch unit cutout?
A 04/12/2021, 3:20:52 PM The winch plate itself is 33.5" x 7". There is a bent flange on the face of the bumper that protrudes 1" back into the winch area. The bumper face is 5" tall.
Q Nick • 04/14/2021, 2:27:37 AM Will the bull bar mount fit this ?
A 04/21/2021, 3:38:02 PM We have many weld-on options, search "DIY Jeep Bumper Hoop" in the search box.
Q Wyatt McManus • 12/09/2021, 11:05:45 PM Does it come with d ring holders as well as d rings
A 12/14/2021, 5:35:57 PM It does not include the d-rings themselves, but it does include the tabs.
Q Elijah Jewell • 03/17/2022, 8:28:47 AM Will this fit a Badlands Apex 12,000lbs winch? I've seen other questions referencing some winches not fitting without modification
A 04/06/2022, 12:43:58 PM Yes it will fit.
Q Drew • 03/26/2022, 3:59:09 PM How will i know what hardware to get with this kit?
A 04/06/2022, 12:32:27 PM You should be able to use your factory hardware.