My Cart: 0 item(s)
My Store
0
1 - 4 Weeks - Estimated time from order to shipment Questions? Call 269-353-1184 (Mon–Fri 8:30–4:30 ET)

Diode Dynamics Heavy Duty Dual Output 4-Pin Offroad Wiring Harness

Diode Dynamics Heavy Duty Dual Output 4-Pin Offroad Wiring Harness
Purchase Diode Dynamics Heavy Duty Dual Output 4-Pin Offroad Wiring Harness
  • $59.95

    $14.95 Flat Rate Shipping

    Code: DD4093 |LBSWeight: 2.92 (lbs)


  • Made in USALimited Lifetime Warranty30-Day Returns


Features
  • Powers a pair of Diode Dynamics Stage Series LED pods with backlight functionality
  • Dual output for two LED pods
  • Connects directly to the battery to power your lights
  • High-capacity 14AWG wiring
  • Dual 4-pin Deutsch DT output connectors for plug-and-play installation
  • 30A waterproof fuse and 60A, 12V relay safeguard your lighting's electrical system
  • Three-way toggle switch included: Backlight / Off / Main Beam
  • OEM aux switch adapter included for vehicles with a factory aux switch bank

Overview
This harness is built for a pair of Diode Dynamics Stage Series pods with backlight functionality, such as the SS3 pods. It connects directly to your vehicle's battery and uses a three-way toggle switch, so you can run just the backlight, turn the lights off, or switch to the main beam. High-capacity 14AWG wiring and Deutsch DT connectors make installation simple and plug-and-play.

The included OEM aux switch adapter lets you control your lights from a factory aux switch bank, using one switch for the main beam and one for the backlight. If your vehicle doesn't have an aux switch bank, mount the included toggle switch instead.

For pods without backlight functionality, use the 2-pin harness instead. Since this harness uses a mechanical relay to deliver high current output, dimming is not possible with switch panel systems.

This harness safely powers up to 25A of auxiliary lamps. Current draw per light:
  • C1 Sport: 1.2A
  • C1 Pro: 1.7A
  • SSC2 Sport: 0.6A
  • SSC2 Pro: 1.75A
  • SS3 Sport: 1.1A main beam, 0.03A backlight
  • SS3 Pro: 2.7A main beam, 0.03A backlight

Specifications
  • Connectors: Dual Deutsch DT 4-pin
  • Wire Size: 14AWG
  • Relay: 60A, 12V
  • Fuse: 30A, waterproof
  • Operating Voltage: 9-16V
  • Operating Temperature: -40°F to 185°F (-40°C to 85°C)
  • Shipped Weight: 2.92 lb

Installation
  • Wire colors: Backlight: Blue, Power In: Red, Main Beam: Yellow
  • Install time: 10 to 20 minutes
  • Basic toolset and basic wiring only

In the Box:
One (1) wiring harness
One (1) three-way toggle switch
One (1) OEM aux switch adapter
Quantity: One (1)
Warranty: 3 year limited replacement warranty

 









Shop by Vehicle and Category

×