Does it work with bed covers?
Any cover where the structure or the cover itself extends more than 3/16" or so over the tops of the bed rails isn't going to work. We've had good luck running the Access Roll-Up covers in both the vanish and the original. You will need to trim the bottom of the mounting rails of the cover where they go over the rack mounts inside and add some extra gasket material for a good seal. Rolling it up is possible with both heights, but it's really a PITA on the shorter rack, so take this into account. A quick video about this coming soon.
How much weight does it handle?
It's stronger than the bed of the truck, but unfortunately, we don't have an official load rating on these kinds of force on that. We've ran this design loaded down with an RTT, hi-lift, shovel, axle, and mountain bikes on trails all over the country without issues. We do recommend running our bed stiffeners with this setup for additional strength: Tacoma Bed Stiffeners
What do I do about the blocked high mount stop lamp?
There are holes on this rack to accept an aftermarket led brake light on the rear of the rack.
Looking for answers to common questions about us or our products? See our FAQ here.
There are no reviews for this item yet.